|Logged in as: Public User|
In TRP-03-114-02 you used a bottom washer plate to bolt through.
Instead of using this washer plate can square plate washers be used?
Can this detail modified to accept MGS mounting heights?
|Other Keywords||box culverts|
|Date||August 5, 2013|
|Response||There should not be any issues with using square plate washers. It is recommended to utilize the same thickness, 1/4"
Yes, raising the rail height to 31" has been allowed. The post should be extended with all other dimensions (base plate, weld, bolts, soil fill, and half post spacing) remaining the same.
|Date||August 6, 2013|
130 Whittier Research Center
2200 Vine Street
Lincoln, NE 68583-0853
The information contained on the Midwest Roadside Safety Facility (MwRSF) website is subject to change without prior notice. The University of Nebraska and the MwRSF is not responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with the use or misuse of or reliance upon any such content, goods, or services available on this site.