Logged in as: Public User

welded beam guard atttachment to low-fill culverts

Question
State WI
Description Text I know that you are working on a report about this. Is it possible to get the CADD in english units, for bolting through the box culvert. If you have an epoxy version with the epoxy information I would like it too.
Keywords
  • Guardrail
Other Keywords culverts, low fill, bolting through
Date May 2, 2013


Response
Response I have atttached the CAD from the recent bogie testing for the guardrail posts mounted to the top slab of concrete box culverts.  Note, the recent study covered component testing of single posts, not the entire system.  Thus, the entire system was not drawn.
Date May 15, 2013
Attachment 00_CulvertGuardrailSystem_R11.DWG
Attachment 01_CulvertGuardrailSystem_R11.DWG
Attachment 02_CulvertGuardrailSystem_R11.DWG
Attachment 03_CulvertGuardrailSystem_R11.DWG
Attachment 04_CulvertGuardrailSystem_R11.DWG
Attachment 05_CulvertGuardrailSystem_R11.DWG


Contact Us:
130 Whittier Research Center
2200 Vine Street
Lincoln, NE 68583-0853
(402) 472-0965
Email: mwrsf@unl.edu
Disclaimer:
The information contained on the Midwest Roadside Safety Facility (MwRSF) website is subject to change without prior notice. The University of Nebraska and the MwRSF is not responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with the use or misuse of or reliance upon any such content, goods, or services available on this site.